Brosis manufacture & design cantilever gate system according to the principles of counter balancing. These cantilever gates are designed for application where a sliding gate is required but the ground is uneven and gateway is used for heavy vehicles, lorries etc which can damage track. In some places, it’s just not possible or feasible rather to install ground tracks. Cantilever gate is approximate 30% to 40% (depending on gate size & weight) longer than tracked sliding gate and this extra length act as counterbalance so that gate slide back and forth freely, supported by roller wheels / carriages at the bottom.
The automation of these gates are based on rack and gear principle. The motor contains drive gear unit which is fixed on ground on foundation plate. The gate moves with the help of its back gear and rack positioned on the lower inside face of the gate. The motor back gear wheel drive the gate to open and close.
The motor contains programmable electronic control unit. This control unit can be integrate with push button, remote control, sensors or any third party access control system to operate the gate automatically.
For example, at sites where the ground is very uneven or track may get exposed to dirt or debris can often lead to problems in the functioning of the automated gates. Yet, it demands a level of security and automation that is second to none. Cantilever Sliding Gates are perfect for such situations.
Cantilever gate is supported from one end and held inches above ground.
Customized designs and patterns are available as per customer requirement.
Certified & ISI approved material is used for manufacturing for these gates provides reliability to protect the premises from an unauthorized access.
High quality, latest techniques & imported cantilever track and top/bottom rollers & carriages.